ADVANTECH CO., LTD

PCL-730

Card Type                  Digital I/O card
Chip Set                   Unidentified
Maximum Onboard Memory     Unidentified
I/O Options                Input channel connectors (2), output channel
                           connectors (2), 37-pin input/output connector
Hard Drives supported      None
Floppy drives supported    None
Data Bus                   8-bit ISA
Card Size                  Half-length, half-height card

[Image]

                                CONNECTIONS

         Function           Label             Function             Label

  20-pin isolated output     CN1      20-pin digital input          CN4
  connector                           connector

  20-pin isolated input      CN2      Isolated output ground        CN5
  connector                           terminal

  20-pin digital output      CN3      37-pin input/output           CN6
  connector                           connector

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   Interrupt triggered on rising edge         JP2         Pins 1 & 3
                                                              closed

      Interrupt triggered on falling edge        JP2         Pins 2 & 4
                                                              closed

                             VERSION SELECTION

         Setting                   JP4                      JP5

           A1                Pins 1 & 2, 4 & 5        Pins 1 & 2, 4 & 5
                                  closed                   closed

           B2                Pins 2 & 3, 5 & 6        Pins 2 & 3, 5 & 6
                                  closed                   closed

  Note: These jumpers control the pin assignments for CN1, CN2, and CN6.

                         INERRUPT SOURCE SELECTION

        Channel             JP3/A        JP3/B       JP3/C        JP3/D

  Isolated DI channel 0    Closed        Open         Open        Open

  Isolated DI channel 1     Open        Closed        Open        Open

    TTL DI channel 0        Open         Open        Closed       Open

    TTL DI channel 1        Open         Open         Open       Closed

                        BASE I/O ADDRESS SELECTION

  Setting   SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8

      200h   Off     On      On      On      On      On      On      On

      204h   Off     On      On      On      On      On      On     Off

      208h   Off     On      On      On      On      On     Off      On

      20Ch   Off     On      On      On      On      On     Off     Off

      210h   Off     On      On      On      On     Off      On      On

  »   300h   Off     Off     On      On      On      On      On      On

      3E0h   Off     Off     Off     Off    Off      On      On      On

      3E4h   Off     Off     Off     Off    Off      On      On     Off

      3E8h   Off     Off     Off     Off    Off      On     Off      On

      3ECh   Off     Off     Off     Off    Off      On     Off     Off

      3FOh   Off     Off     Off     Off    Off     Off      On      On

                                   Note:

  A total of 125 valid base address settings are available. The switches
  are a binary representation of the decimal memory addresses. SW1/8 is
  the Least Significant Bit and switch SW1/1 is the Most Significant Bit.
  The switches have the following decimal values: SW1/1=512, SW1/2=256,
  SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, SW1/8=4. Turn off the
  switches and add the values of the switches to obtain the correct
  memory address. (Off=1, On=0)

                           IRQ INTERRUPT SELECTION

      IRQ       JP1/A    JP1/B    JP1/C    JP1/D    JP1/E    JP1/F    JP1/G

       IRQ2     Closed    Open     Open     Open    Open     Open     Open

       IRQ3      Open    Closed    Open     Open    Open     Open     Open

       IRQ4      Open     Open    Closed    Open    Open     Open     Open

       IRQ5      Open     Open     Open    Closed   Open     Open     Open

       IRQ6      Open     Open     Open     Open    Closed   Open     Open

       IRQ7      Open     Open     Open     Open    Open     Closed   Open

  »   Disabled   Open     Open     Open     Open    Open     Open     Closed